Mold making material overview
- BL
Owned by BL
| .Navn | Regine har | Egen erfaring | Egnethet Miniatyrer | Egnethet barnegips | Materiale | Cure | Type | Appliance | Ratio | Varmereaksjoner | Svovel? | Herding | Work time | Cure time minutter | Viscosity | Hardness A | Hardness D | TS PSI | TS MPa | Giftig produkt? | Elongation | Notater | NOK/kit | Kg/kit | Nok/kg | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Smooth-on - Equinox 40 Slow | 17 | 168 | Putty | .1.1 | 30,0 | 300 | 40 | 520 | Food grade | 430 | |||||||||||||||||||
| Sillicreations - Modelling putty | -20 | 155 | Silikon | Epoxy | Putty | .1:1 | Food grade | 152 | 0,15 | 1013,333 | |||||||||||||||||||
| Silicones Inc - P4 | 226 | 151 | Platinum | Herder ikke med sulfur/svovel | 120,0 | 960 | 4 000 | 41 | 700 | ||||||||||||||||||||
| Wacker - Elastosil 4503 | 0 | 0 | 106 | 131 | Silikon | 0 | 0 | Gel | - | 0 | 0 | Auto | 90,0 | 900 | 40 000 | 20 | 0 | 725 | 5 | 0 | 0 | 0 | |||||||
| Polytek - Mouldcraft - Fast-sil 35 | -64 | 111 | Putty | .1:1 | 3,0 | 60 | 35 | 2,5 | Food grade | 1163 | 1 | 1163 | |||||||||||||||||
| Resilpom 2 | 31 | 106 | Platinum | .1:1 | Herder ikke med sulfur/svovel | 3,0 | 8 | 30 | Food grade | ||||||||||||||||||||
| Silicone Spread | -20 | 105 | Brush-on | 20,0 | Food grade | ||||||||||||||||||||||||
| Aeromarine Products - FOOD GRADE SILICONE RUBBER | 77 | 102 | Platinum | Epoxy | Pouring | .10:1 weight | Herder ikke med sulfur/svovel | Auto | 45,0 | 1 440 | 25 000 | 40 | 750 | Food grade | |||||||||||||||
| DWR Plastics - RTV Silicone Moulding Rubber Food grade A28 | 0 | Anbefales: God på detaljer, grei herdetid, grei tensile strength, grei hardhet, lite bobler | 7 | 82 | Silikongummi | Platinum | 0 | Pouring | .1:1 | 0 | Herder ikke med sulfur/svovel | Auto | 20,0 | 360 | 14 000 | 28 | 0 | - | 0 | Food\skin grade | 479 | 1 | 479 | ||||||
| HobbySilicone - Firm 128 FG Cat | -48 | 77 | Silikon | Epoxy | Auto | 35,0 | 720 | 26 | Food grade | ||||||||||||||||||||
| DWR Plastics - RTV Silicone Moulding Rubber Food grade A15 | 0 | 102 | 77 | Silikongummi | Platinum | Polymer | Pouring | .1:1 | Herder | Herder ikke med sulfur/svovel | Auto | 20,0 | 360 | 14 000 | 15 | 0 | - | 0 | Food\skin grade | 397 | 1 | 397 | |||||||
| Prevest DenPro - Hiflex - DIY Putty | Anbefales ikke: Herder forferdelig fort, derfor umulig å ta annet enn små detaljer. Bonder ikke med seg selv. Potensielt god på detaljer. Elendig tensile strength. Bruk respirator. | -6 | 69 | Platinum | Epoxy | Putty | .1:1 | Tåler 150 grader | 1,5 | 4 | 60 | 200 | Food grade | 370 | 1 | 370 | |||||||||||||
| Alumilite - Plat 55 | 0 | 0 | 43 | 68 | Silikon | Platinum | Epoxy | Gel | 1:4 volume | 0 | Herder ikke med sulfur/svovel | Auto | 60,0 | 360 | 80 000 | 55 | 0 | 700 | 5 | 0 | 0 | 0 | |||||||
| PINKYSIL® - FAST SET SILICONE | -9 | 66 | Epoxy | .1:1 | Auto | Skin grade | |||||||||||||||||||||||
| CopyFlex | 0 | 0 | 67 | 42 | Silikongummi | 0 | Epoxy | Pouring | .1:1 | Giftige gasser ved brenning | 0 | Auto | 0,0 | 240 | 14 000 | 28 | 0 | - | 0 | Food grade | 0 | 0 | |||||||
| Environmental Technology - CastinCraft - EasyMold - Silicone Putty | -188 | 37 | Silikon | Epoxy | Putty | 3,0 | 25 | Food grade | 391 | 0,452 | 865,0442 | ||||||||||||||||||
| Bluesil - RTV 3428 Food Grade Silicone | -104 | 21 | Silikon | Elastomer | Epoxy | .10:1 | Auto | 300 | 28 | Food grade | |||||||||||||||||||
| Hiflex - Flexo Putty | -108 | 17 | Putty | 1,5 | Food grade | 1 | |||||||||||||||||||||||
| Bluestar Silicones - Rhodorsil ® RTV-3040 | -13 | 12 | Silikongummi | Epoxy | 60,0 | 1 440 | 50 000 | 38 | 920 | Ikke giftig | |||||||||||||||||||
| Polycraft - Food Grade Addition Cure Silicone Moulding Making Rubber | -116 | 9 | Silikongummi | Platinum | Epoxy | .10:1 | Herder ikke med sulfur/svovel | Auto | 960 | 1 300 | 59 | 650 | Food grade | ||||||||||||||||
| Polycraft - M Food Grade RTV Silicone | -117 | 8 | .10:1 | 960 | 1 300 | 59 | 650 | Food grade | |||||||||||||||||||||
| Resilpom F | -71 | 4 | Platinum | .1:1 | Herder ikke med sulfur/svovel | 3,0 | 15 | 6 000 | 20 | 580 | Food grade | ||||||||||||||||||
| Shin-Etsu Silicones - SES22250/CAT22250-30 | -29 | -4 | Epoxy | .10:1 | 70,0 | 1 440 | 35 000 | 856 | 5,9 | ||||||||||||||||||||
| Hiflex - Silky Touch Putty | -230 | -5 | Putty | ikke giftig | 752 | 0,9 | 835,5556 | ||||||||||||||||||||||
| Smooth-On - Plasti-Paste | 1 | 0 | -2 | -27 | 0 | 0 | Epoxy | Gel | 1:1 volume | 0 | 0 | Auto | 10,0 | 90 | 39 999 | 70 | 0 | 2 150 | 15 | 0 | 0 | ||||||||
| Smooth-on - EpoxaCoat Green | 0 | 0 | -53 | -28 | 0 | 0 | Epoxy | Gel | .2:1 | 0 | 0 | Auto | 20,0 | 960 | 39 999 | 0 | 85 | 26 000 | 179 | 0 | 0 | 0 | |||||||
| PolyTek - MouldCraft - FG-RTV 430 | 0 | Anbefales: Grei å blande, lite bobler, god viskositet. Treg herding. Mye som DWR Plastics RTV Food Grade A28 | -8 | -33 | Silikongummi | Platinum | Epoxy | Pouring | .1:1 | 0 | Herder ikke med sulfur/svovel | Auto | 3,0 | 960 | 1 300 | 30 | 0 | 650 | 4 | Food\skin grade | 245 | 0,5 | 489 | ||||||
| PolyTek - Poly 75-70 | 0 | 0 | 75 | -50 | 0 | 0 | Epoxy | 0 | .1:1 | 0 | 0 | Auto | 40,0 | - | - | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Smooth-on - Encapso K | 0 | 0 | 382 | -52 | Gummi | Platinum | Epoxy | Pouring | .1:1 | 0 | Herder ikke med sulfur/svovel | Auto | 120,0 | 1 440 | 150 | 33 | 0 | - | 0 | 100 | 0 | 0 | 0 | ||||||
| PolyTek - MouldCraft - A2000L | 0 | 0 | 273 | -52 | Polyuretan | Uretan | Epoxy | Pouring | 1:1 volume | 0 | 0 | Auto | 5,0 | 60 | 50 | 0 | 72 | - | 0 | giftig | 1609 | 10 | 160,9 | ||||||
| Smooth-on - Rubber Glass | 0 | 0 | 373 | -61 | Silikongummi | Platinum | Epoxy | Pouring | .1:1 | 0 | Herder ikke med sulfur/svovel | Auto | 120,0 | 960 | 150 | 33 | 0 | 0 | 100 | Ment å knuses i biter | 0 | 0 | |||||||
| Alumilite - Trans 40 | 0 | 0 | -92 | -67 | Silikon | Platinum | Epoxy | Gel | .1:5 | 0 | Herder ikke med sulfur/svovel | Auto | 30,0 | 720 | 67 000 | 40 | 0 | 870 | 6 | 0 | 0 | 0 | |||||||
| AD-SIL 20 | 47 | -78 | Platinum | Epoxy | .1:1 | Herder ikke med sulfur/svovel | Auto | 30,0 | 120 | ||||||||||||||||||||
| Environmental Technology - CastinCraft - EasyMold - Silicone Rubber | -116 | -91 | Pouring | 45,0 | 1 440 | 800 | Food grade | 442,13 | 0,454 | 973,8546 | |||||||||||||||||||
| Smooth-On - Rebound 25 | 1 | 0 | -157 | -97 | 0 | 0 | Epoxy | Brush-on | .1:1 | 0 | 0 | Auto | 20,0 | 360 | 25 | 0 | 515 | 4 | 690 | 0 | 685 | 0,9 | 761,1111 | ||||||
| Wacker - SILGEL® 611 A/B Silicone Gel | 0 | 0 | 211 | -114 | Silikongummi | Epoxy | Pouring | .1:1 | Auto | 60,0 | 360 | 1 000 | |||||||||||||||||
| PolyTek - FormRub 60 | 0 | 0 | 203 | -122 | Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 22,0 | 960 | 2 000 | 60 | 0 | 835 | 6 | 0 | 0 | 0 | |||||||
| T-30 | 1 | -124 | Platinum | Epoxy | .1:1 | Herder ikke med sulfur/svovel | Auto | 30 | |||||||||||||||||||||
| Smooth-on - Smooth-sil 945 | 0 | 0 | 112 | -125 | 0 | 0 | Epoxy | Pouring | 1:1 volume | 0 | 0 | Auto | 25,0 | 360 | 30 000 | 45 | 0 | 700 | 5 | 320 | 0 | 0 | 0 | ||||||
| Smooth-on - Smooth-sil 940 | 0 | 0 | -133 | -128 | Silikon | Platinum | Epoxy | Pouring | .10:1 | Herder ikke med sulfur/svovel | Auto | 30,0 | 1 440 | 35 000 | 40 | 600 | Food grade | 300 | |||||||||||
| Smooth-On - ReoFlex 50 | 0 | 0 | 165 | -134 | Silikon | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 50,0 | 960 | 2 000 | 50 | 0 | 580 | 4 | 435 | 0 | 0 | 0 | ||||||
| LIFEFORM | -9 | -134 | Silikongummi | .1:1 | Auto | ||||||||||||||||||||||||
| LifeForm Face Coat | -9 | -134 | .1:1 | Auto | |||||||||||||||||||||||||
| Poly Litecast | 0 | 0 | -9 | -134 | Polyuretan | Uretan | Epoxy | 0 | .1:1 | 0 | 0 | Auto | 0,0 | - | - | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| PolyTek - Platsil Silicone 71-20 | 0 | 0 | -9 | -134 | Silikongummi | Platinum | Epoxy | 0 | .1:1 | 0 | Herder ikke med sulfur/svovel | Auto | 0,0 | - | - | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| PS Sili-Glass | -9 | -134 | Platinum | Epoxy | .1:1 | Herder ikke med sulfur/svovel | Auto | ||||||||||||||||||||||
| Smooth-on - EpoxaCoat Red | 0 | 0 | -53 | -137 | 0 | 0 | Epoxy | Gel | .2:1 | 0 | 0 | Auto | 20,0 | 960 | 39 999 | 0 | 85 | 26 000 | 179 | 100 | 0 | 0 | 0 | ||||||
| PolyTek - Mouldcraft - SS-RTV 600 | 0 | 0 | -26 | -151 | Silikongummi | Platinum | Epoxy | ? | .1:1 | Giftige gasser ved brenning | Herder ikke med sulfur/svovel | Auto | 20,0 | 1 440 | - | 22 | 0 | - | 0 | 349 | 1 | 349 | |||||||
| PolyTek - MouldCraft - PT Flex 85 | 0 | 0 | 167 | -158 | Polyuretan Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 5,0 | 30 | 750 | 85 | 0 | - | 0 | 383 | 1 | 383 | |||||||
| Smooth-On - ReoFlex 30 | 0 | 0 | 56 | -167 | Silikon | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 30,0 | 960 | 1 500 | 30 | 0 | 450 | 3 | 1 000 | 0 | 0 | 0 | ||||||
| Wacker - Elastosil R 6225 RTV-2 | 0 | 0 | -92 | -167 | Silikongummi | Epoxy | Auto | 2 500 | 45 | 725 | 5 | ||||||||||||||||||
| GOMMA DI SILICONE ATOSSICA MORBIDA PER CREARE FORMINE CALCHI PA 535 | -144 | -169 | Silikon | Epoxy | Putty | .1:1 | 3,0 | 8 | 43 | Ikke giftig | 549,5 | 1 | 549,5 | ||||||||||||||||
| Castaldo - LiquaFast ICE RTV silicone rubber | -49 | -174 | 1:1 weight | 15,0 | 30 | 8 500 | 40 | 508 | |||||||||||||||||||||
| PolyTek - Poly-Optic® 1410 | 0 | 0 | -99 | -174 | Polyuretan | Uretan | Epoxy | 0 | .3:2 | 0 | 0 | Auto | 0,0 | - | - | 0 | 80 | - | 0 | 0 | 0 | 0 | |||||||
| Woodland Scenics - Realistic Water | 0 | 0 | -109 | -184 | 0 | 0 | Epoxy | ? | - | 0 | 0 | Auto | 0,0 | - | - | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Monster Makers - RD-407 | 0 | 0 | -110 | -185 | Latex | 0 | 0 | ? | - | 0 | 0 | ? | 0,0 | - | - | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Panduro Formlatex | 0 | Anbefales ikke: Herder tregt, klistrer seg sammen | -110 | -185 | 0 | 0 | 0 | ? | - | 0 | 0 | ? | 0,0 | - | - | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| PolyTek - Mouldcraft - Liquid latex | 0 | 0 | -110 | -185 | 0 | 0 | 0 | ? | - | 0 | 0 | ? | 0,0 | - | - | 0 | 0 | - | 0 | 0 | 0 | ||||||||
| Instant mold | -210 | -185 | Putty | Ikke giftig | 115 | 0,05 | 2564 | ||||||||||||||||||||||
| Smooth-on - Smooth-sil 935 | 0 | 0 | -192 | -186 | 0 | 0 | Epoxy | Gel | .10:1 | 0 | 0 | Auto | 45,0 | 1 440 | 40 000 | 35 | 0 | - | 0 | 300 | 0 | 0 | 0 | ||||||
| PolyTek - Poly Optic 1420 | 0 | 0 | -115 | -190 | Polyuretan | Uretan | Epoxy | 0 | .2:1 | 0 | 0 | Auto | 0,0 | - | - | 0 | 85 | - | 0 | 0 | 0 | 0 | |||||||
| Smooth-on - Mold Max 30 | 0 | 0 | -205 | -199 | Silikon | 0 | Epoxy | Gel | .10:1 | 0 | 0 | Auto | 45,0 | 1 440 | 25 000 | 30 | 0 | - | 0 | 300 | 0 | 0 | 0 | ||||||
| Smooth-on - Mold Max - Stroke | -107 | -202 | .100:10 | 20,0 | 45 | 30 | 300 | ||||||||||||||||||||||
| Wagner Dental - Awasil - 40 | -178 | -203 | Silikon | Epoxy | Putty | .1:1 | Tåler 250 celsius | 1,3 | 4 | 40 | 194 | 0,28 | 692,8571 | ||||||||||||||||
| Micro-Mark - Silicone Putty, 1 lb. | -130 | -205 | Putty | ||||||||||||||||||||||||||
| Alumilite Mold Putty | -230 | -205 | Putty | 311 | 0,2983 | 1042,505 | |||||||||||||||||||||||
| Blu-Stuff Firm Silicone Putty | -230 | -205 | Putty | 195 | 0,3 | 650 | |||||||||||||||||||||||
| Oyumaru | -230 | -205 | Putty | 56 | 0,04 | 1549 | |||||||||||||||||||||||
| Smooth-On - Mold Star 30 | 0 | 0 | 17 | -213 | 0 | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 45,0 | 360 | 12 500 | 30 | 0 | 420 | 3 | 339 | 0 | 0 | 0 | ||||||
| PolyTek - FormRub 65 | 0 | 0 | 108 | -217 | Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 35,0 | 960 | 1 500 | 65 | 0 | 500 | 3 | 0 | 0 | 0 | |||||||
| QM 1125 | -93 | -218 | Epoxy | .1:1 | 3,5 | 3 500 | 26 | ||||||||||||||||||||||
| Sculpey Liquid | 0 | 0 | -144 | -219 | 0 | 0 | 0 | ? | - | Herder | 0 | Varme | 10,0 | 15 | - | 0 | 0 | - | 0 | Tåler altfor lite til miniatyrfigurer. | 0 | 0 | |||||||
| Polytek - Poly 1512 | 0 | 0 | 103 | -222 | Polyuretan | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 22,0 | 60 | 400 | 0 | 71 | - | 0 | 0 | 0 | 0 | |||||||
| Micro-Mark - One-To-One Rapid Mold Rubber | 0 | 0 | 97 | -228 | Silikongummi | 0 | Epoxy | Pouring | .1:1 | Tåler 230 grader | 0 | Auto | 30,0 | 240 | - | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Fimo Liquid | 0 | 0 | -154 | -229 | 0 | 0 | Epoxy | ? | - | 0 | 0 | Varme | 10,0 | 15 | - | 0 | 0 | - | 0 | - | 0 | 0 | |||||||
| PolyTek - PolyGel 50 | 0 | 0 | -8 | -233 | Gummi urethan | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 20,0 | 960 | 39 999 | 50 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Polycraft - Zhermack - ZA13 | -111 | -236 | Silikongummi | Platinum | Epoxy | .1:1 | Herder ikke med sulfur/svovel | Auto | 40,0 | 150 | 4 500 | 13 | 435 | ||||||||||||||||
| PolyTek - Glassrub 50 | 0 | 0 | 86 | -239 | Polyuretan Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 30,0 | 960 | 1 200 | 50 | 0 | 360 | 2 | 0 | 0 | 0 | |||||||
| PolyTek - MouldCraft - FG-RTV 440 | 0 | 0 | 84 | -241 | Silikongummi | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 0,0 | 960 | 6 500 | 40 | 0 | - | 0 | 0 | 0 | ||||||||
| PolyTek - MouldCraft - PT Flex 60 Liquid Rubber | 0 | 0 | -25 | -250 | Polyuretan Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 5,0 | 60 | 625 | 60 | 0 | - | 0 | 251,3 | 0,5 | 502,6 | |||||||
| Smooth-on - Sorta-clear 37 | 0 | 0 | -47 | -257 | Silikon | Platinum | Epoxy | Pouring | .1:1 | 0 | Herder ikke med sulfur/svovel | Auto | 25,0 | 240 | 35 000 | 37 | 0 | 600 | 4 | 400 | 0 | 0 | 0 | ||||||
| PolyTek - Platsil Silicone 73-40 | 0 | 0 | 68 | -257 | Silikongummi | Platinum | Epoxy | Pouring | .1:10 | 0 | Herder ikke med sulfur/svovel | Auto | 45,0 | 960 | - | 40 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| QM 122 | -294 | -269 | Epoxy | .10:1 | 35,0 | 15 000 | 22 | ||||||||||||||||||||||
| Smooth-On - Dragon Skin 20 | 0 | 0 | -118 | -270 | 0 | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 25,0 | 240 | 20 000 | 20 | 0 | 550 | 4 | 620 | 0 | 0 | 0 | ||||||
| Acc-silicones - MM740FG | -198 | -273 | Silikongummi | Platinum | Epoxy | Herder ikke med sulfur/svovel | Auto | 40 | |||||||||||||||||||||
| GoCast | -198 | -273 | Auto | 5,0 | 10 | ||||||||||||||||||||||||
| MYOM Silicone Spread | 0 | 0 | -69 | -294 | Silikon | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 15,0 | 120 | 14 000 | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Acc-silicones - MM730FG | -219 | -294 | Silikongummi | Platinum | Epoxy | Herder ikke med sulfur/svovel | Auto | 30 | |||||||||||||||||||||
| FormX - FormSil 30T | 0 | 0 | -219 | -294 | 0 | 0 | Epoxy | 0 | 0 | 0 | Auto | 0,0 | - | - | 30 | 0 | - | 0 | 0 | 0 | 0 | ||||||||
| PolyTek - MouldCraft - PT Flex 60 | 0 | 0 | 25 | -300 | Polyuretan Gummi | Uretan | Epoxy | Pouring | .1:1 | Tåler 200 grader | 0 | Auto | 5,0 | 30 | 600 | 60 | 0 | - | 0 | 0 | 0 | ||||||||
| PolyTek - MouldCraft - PT Flex 20 | 0 | Anbefales ikke: Veldig mye giftige gasser, formen går i stykker av 1 resin cast | 25 | -300 | Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 4,0 | 30 | 520 | 20 | 0 | 250 | 2 | 645,3 | 2 | 322,7 | |||||||
| Polytek - Poly 1512X | 0 | 0 | 23 | -302 | Polyuretan | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 5,0 | 30 | 400 | 0 | 71 | - | 0 | 0 | 0 | 0 | |||||||
| Bluesil RTV 3428 A+B Food Grade Silicone | -229 | -304 | .10:1 | Auto | |||||||||||||||||||||||||
| Smooth-On - Dragon Skin 10 Medium | 0 | 0 | -381 | -304 | 0 | 0 | Epoxy | Gel | .1:1 | 0 | 0 | Auto | 20,0 | 300 | 23 000 | 10 | 0 | 475 | 3 | 1 000 | 0 | 0 | 0 | ||||||
| PolyTek - MouldCraft - PT Flex 60 Casting Rubber | 0 | 0 | 20 | -305 | Polyuretan Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 4,0 | 30 | 600 | 60 | 0 | - | 0 | 0 | 0 | ||||||||
| PolyTek - Poly 74-45 | 0 | 0 | -230 | -305 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0,0 | - | - | 0 | 0 | - | 0 | 0 | 0 | 0 | ||||||||
| PolyTek - FormRub 50 | 0 | 0 | 20 | -305 | Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 15,0 | 960 | 800 | 50 | 0 | 600 | 4 | 0 | 0 | 0 | |||||||
| PolyTek - MouldCraft - PT Flex 50 | 0 | 0 | 18 | -307 | Polyuretan Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 4,0 | 120 | 550 | 50 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| PolyTek - PlatSil SiliGlass | 0 | 0 | 15 | -310 | Silikon | Platinum | Epoxy | Pouring | .1:1 | 0 | Herder ikke med sulfur/svovel | Auto | 5,0 | 30 | 190 | 40 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| MYOM Silicone Plastique | 0 | 0 | -92 | -317 | 0 | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 10,0 | 60 | 14 000 | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| PolyTek - FormRub 35 | 0 | 0 | 3 | -322 | Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 15,0 | 960 | 600 | 35 | 0 | 283 | 2 | 0 | 0 | 0 | |||||||
| Bluestar Silicones - Silbione - LSR M330 | -50 | -325 | Polymer | Pouring | Herder ikke med sulfur/svovel | 550 | 30 | 1 340 | Ikke giftig | ||||||||||||||||||||
| Alumilite - Quick-Set | 0 | 0 | -154 | -329 | Silikon | Tin | Epoxy | Pouring | .10:9 | 0 | Tåler sulfur/svovel | Auto | 30,0 | 1 080 | 13 000 | 40 | 0 | 400 | 3 | 0 | 0 | 0 | |||||||
| Alumilite - Amazing Mold Rubber | 0 | 0 | -106 | -331 | Silikon | Tin | Epoxy | Pouring | 1:1 weight | Tåler 83 grader | Tåler sulfur/svovel | Auto | 20,0 | 120 | 15 000 | 25 | 0 | 550 | 4 | 0 | 0 | 0 | |||||||
| Smooth-on - EpoxAcast 690 | 0 | 0 | 51 | -332 | 0 | 0 | Epoxy | Pouring | .10:1 | 0 | 0 | Auto | 300,0 | 1 440 | 200 | 80 | 0 | - | 0 | 100 | - | 0 | 0 | ||||||
| Micro-Mark - One-To-One - Express Mold Rubber | 0 | 0 | -12 | -337 | Silikongummi | 0 | Epoxy | Pouring | .1:1 | Tåler 230 grader | 0 | Auto | 6,0 | 30 | - | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Smooth-on - Crystal Clear 202 | 0 | 0 | 90 | -338 | Resin | Uretan | Epoxy | Pouring | 1:1 weight | Tåler 85 grader | 0 | Auto | 0,0 | 90 | 600 | 80 | 0 | - | 0 | 110 | 0 | 0 | 0 | ||||||
| Smooth-On - Mold Star 20T | 1 | 0 | -255 | -343 | 0 | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 6,0 | 30 | 11 000 | 20 | 0 | 420 | 3 | 470 | 0 | 478 | 0,9 | 531,1111 | |||||
| Acc-silicones - MM720FG | -272 | -347 | Silikongummi | Platinum | Epoxy | Herder ikke med sulfur/svovel | Auto | 20 | |||||||||||||||||||||
| Poly-Optic 1410 | 0 | 0 | -75 | -350 | Polyuretan | Uretan | Epoxy | Pouring | .2:1 | Tåler 110 grader | 0 | Auto | 15,0 | 120 | 700 | 85 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Smooth-On - Task 18 | 1 | 0 | 32 | -351 | 0 | 0 | Epoxy | Pouring | .100:12 | 0 | 0 | Auto | 20,0 | 960 | 4 400 | 88 | 0 | 3 250 | 22 | 101 | 0 | 0 | 0 | ||||||
| Alumilite - High-Strength 2 | 0 | 0 | -177 | -352 | Silikon | Tin | Epoxy | Pouring | 1:2 volume | 0 | Tåler sulfur/svovel | Auto | 45,0 | 720 | 18 000 | 20 | 0 | 550 | 4 | 0 | 0 | 0 | |||||||
| PolyTek - MouldCraft - FG-RTV 420 | 0 | 0 | -41 | -366 | Silikongummi | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 0,0 | 960 | 900 | 20 | 0 | 650 | 4 | 0 | 0 | ||||||||
| PolyTek - MouldCraft - PT Flex 50 Casting Rubber | 0 | 0 | -42 | -367 | Polyuretan Gummi | Uretan | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 4,0 | 120 | 450 | 50 | 0 | 250 | 2 | 0 | 0 | 0 | |||||||
| PolyTek - MouldCraft - PT Flex D60 Casting Rubber | 0 | 0 | -92 | -367 | Gummi | 0 | Epoxy | Pouring | .2:1 | 0 | 0 | Auto | 10,0 | 960 | 3 000 | 0 | 60 | - | 0 | 0 | 0 | 0 | |||||||
| PolyTek - Platsil Silicone 73-20 | 0 | 0 | -45 | -370 | Silikongummi | Platinum | Epoxy | Pouring | .1:1 | 0 | Herder ikke med sulfur/svovel | Auto | 5,0 | 60 | 2 000 | 22 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Smooth-On - FlexFoam-IT | 1 | 0 | -47 | -372 | 0 | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 0,8 | 240 | 1 000 | 0 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Pebeo - gede - Siligum Silicone moulding paste | 0 | 0 | -300 | -375 | 0 | 0 | 0 | ? | 0 | 0 | ? | 3,0 | 5 | - | 0 | 0 | - | 0 | 0 | 0 | 0 | ||||||||
| Bluestar Silicones - Silbione - RTV 4410 | -327 | -402 | 60,0 | 2 500 | 10 | 430 | Ikke giftig | ||||||||||||||||||||||
| Epoxiharts Epoxi 141 | 0 | 0 | -128 | -403 | 0 | 0 | Epoxy | Pouring | 10:1 weight | 0 | 0 | Auto | 0,0 | 1 440 | - | 70 | 0 | - | 0 | 0 | 0 | 0 | |||||||
| Smooth-On - Oomoo 25 | 0 | Anbefales ikke: Håpløst å få en rett flate på mold, dritt å røre sammen tilstrekkelig, masse bobler, sprer seg ikke ut i formen skikkelig | -39 | -404 | 0 | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 15,0 | 75 | 4 250 | 25 | 0 | 240 | 2 | 250 | 0 | 0 | 0 | ||||||
| Smooth-On - Shell Shock Slow | 1 | 0 | -28 | -411 | Plastic | 0 | Epoxy | Pouring | 1:4 volume | 0 | 0 | Auto | 8,0 | 300 | 3 000 | 85 | 0 | 3 100 | 21 | 100 | 0 | 0 | 0 | ||||||
| PolyTek - Poly-Optic® 14-70 | 0 | 0 | -140 | -415 | Polyuretan Gummi | Uretan | 0 | Pouring | 0 | 0 | 0 | 0,0 | - | - | 70 | 0 | - | 0 | 0 | 0 | 0 | ||||||||
| QM 100 | -152 | -427 | Epoxy | Pouring | .10:1 | 24,0 | 550 | 30 | |||||||||||||||||||||
| Bluestar Silicones - BLUESIL™ FLD 47 V 5 | -160 | -435 | Polymer | Polymer | Polymer | Pouring | 5 | Ikke giftig | |||||||||||||||||||||
| PolyTek - Poly Optic 1412 | 0 | 0 | -168 | -443 | Polyuretan | Uretan | 0 | Pouring | 0 | 0 | 0 | 0,0 | 30 | - | 0 | 0 | - | 0 | 0 | 0 | 0 | ||||||||
| Smooth-on - Dragon Skin 10 Fast | 0 | 0 | -332 | -455 | Silikon | Platinum | Epoxy | Pouring | .1:1 | Tåler 200 grader | Herder ikke med sulfur/svovel | Auto | 9,0 | 300 | 14 000 | 10 | 0 | - | 0 | 1 000 | 0 | 0 | 0 | ||||||
| PolyTek - MouldCraft - PT Flex 50 Liquid Rubber | 0 | 0 | -182 | -457 | Polyuretan Gummi | Uretan | Epoxy | Pouring | 0 | 0 | Auto | 8,0 | 60 | 550 | 50 | 0 | - | 0 | 0 | 0 | 0 | ||||||||
| Bluestar Silicones - Silbione - LSR 4330 | -191 | -466 | Pouring | 0,3 | 0 | 550 | 30 | 1 400 | Ikke giftig | ||||||||||||||||||||
| Smooth-On - Foam-it 5 | 1 | 0 | -44 | -477 | 0 | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 1,5 | 120 | 300 | 0 | 0 | - | 0 | 100 | 0 | 0 | 0 | ||||||
| Blu-Stuff, Liquid | 0 | Anbefales ikke: Herder for fort, mye bobler, veldig dyr. | -357 | -482 | Silikongummi | 0 | Epoxy | Pouring | .1:1 | 0 | 0 | Auto | 3,0 | 20 | 14 000 | 0 | 0 | - | 0 | Ikke giftig | Herder veldig raskt (~5min), vanskelig å unngå bobler | 249 | 0,2 | 1245 | |||||
| Smooth-On - EpoxAcast 650 + 103 | 0 | 0 | -137 | -520 | 0 | 0 | Epoxy | Pouring | 10:1 weight | 0 | 0 | Auto | 20,0 | 60 | 7 000 | 93 | 0 | - | 0 | 100 | 0 | 0 | 0 | ||||||
| Bluestar Silicones - Silbione - HCRA 4150 | -672 | -797 | Platinum | Epoxy | .1:1 | Tåler minst 160 grader | Herder ikke med sulfur/svovel | Auto | 480,0 | 10 | 50 | 1 600 | Ikke giftig | ||||||||||||||||
| Wacker - Powersil - 412 A/B HTV | 0 | 0 | -21 268 | -21 393 | Silikongummi | Epoxy | .1:1 | Auto | 1440,0 | 54 | 363 | 2,5 | |||||||||||||||||
Silikonfarger - hvilken silikon ser du på bildet?
| Silikon | Farge | Sett i molds til salgs |
|---|---|---|
| Alumilite - Plat 55 |  | 1 |
| Alumulite - Plat 10, 25, and 40 |
| |
| CopyFlex |
| |
| DWR Plastics - RTV Silicone Moulding Rubber Food grade A28 |
| 1 |
| Environmental Technology - CastinCraft - EasyMold - Silicone Putty |
| 1 |
| PINKYSIL® - FAST SET SILICONE |
| 1 |
| Prevest DenPro - Hiflex - DIY Putty |
| |
| Silicone Spread |
| |
| Sillicreations - Modelling putty |
| |
| Smooth-on - Equinox 40 Slow |
| |
| Smooth-On - Mold Star |
| 1 |
| Smooth-On - Rebound 25 |
|
Undertemaer:
Indirekte relaterte sider:
Filter by label
There are no items with the selected labels at this time.
test footer